Canon XA-10
From PPL Documentation Wiki
This page contains setup instructions for the Canon XA10 camcorder.
Canon XA-10
On the XLR controls arm, both ATT switches should be OFF. The second switch should be switched to EXT. The volume switches can be adjusted as needed, but always start at 0. The CH1 and CH2 switches should be on MIC +48.
In 'M' mode, open the flip screen and touch FUNC > MENU and scroll all the way to the bottom to the XLR Rec Channel and make sure it is on CH1. A pair of audio monitors should display on the flip screen showing -dB level.
Azden 330 UPR
- The channel being used as of 3/22/13 is 32-02 on the receiver and mic packs.
- The yellow switch for Channel 1 and 2 must be turned on the receiver.
Turn on the mic packs, the receiver and start recording. If the -dB meters are moving, the audio is recording.